Thermostat Settings and Presets Overview

Overview

The Thermostat Settings page allows you to connect supported thermostats, configure seasonal settings, create temperature presets, and manage thermostat behavior across your properties.
Thermostats can be assigned to presets, allowing you to automate temperature settings based on seasonal date ranges.

Accessing Thermostat Settings

Navigate to Settings > Thermostats.
The page includes:

• Connected thermostat accounts
• Member control settings
• Seasonal date ranges
• Thermostat presets

If you need assistance, you can access the support guide or contact PadPulse using the support widget in the bottom-right corner of the platform.

Connect a Thermostat

PadPulse supports multiple thermostat providers through Connected Accounts.
To connect a thermostat:

1. Navigate to Connected Accounts.
2. Select Connect.
3. Choose the appropriate thermostat provider.
4. Complete the connection process.

You can connect up to two thermostats per property.

Configure Member Thermostat Access

You can choose whether residents are allowed to control the thermostat for their property.
To update this setting:

1. Open Thermostat Settings.
2. Enable or disable member thermostat control.
3. Save your changes.

Configure Seasonal Date Ranges

Seasonal date ranges determine when your summer and winter thermostat settings are applied.
To configure seasonal dates:

1. Open Settings.
2. Set the start and end dates for your summer and winter seasons.
3. Save your changes.

These date ranges are used when applying thermostat presets.

Create a Thermostat Preset

Presets allow you to apply the same thermostat configuration across one or more devices.
To create a preset:

1. Navigate to Presets.
2. Select Add Preset.
3. Enter a name for the preset.
4. Configure the desired settings, including:
5. • Summer temperature set points
   • Fan mode
   • Additional thermostat settings
5. Assign one or more thermostats to the preset.
6. Save the preset.

The preset will automatically use the seasonal date ranges configured in your thermostat settings.

Assign Thermostats to Presets

Each thermostat can be associated with a preset.
If a thermostat is already assigned to another preset, it cannot be selected until it has been removed from its current assignment.
You can view which thermostats are assigned to a preset by hovering over the preset name.

View Connected Devices

Preset cards display the thermostats associated with each preset.
If multiple thermostats are assigned, you can quickly review the connected devices by hovering over the preset.

Important Notes

• PadPulse supports up to two thermostats per property.
• Member thermostat control can be enabled or disabled in Settings.
• Seasonal date ranges determine when summer and winter settings are applied.
• Thermostats can only be assigned to one preset at a time.
• Thermostat presets allow consistent temperature settings across multiple devices.

Updated on: 30/06/2026